16 kanaler analog input station med RS422/485 interface (Intech 2100-A16-X)

> > Vare nr.: IN2100-A16-X

16 stk. analoge indgange

4 stk. digitale indgange

2 stk. relæ udgange

2 stk. 0/4-20mA udgange

Forsyning 85-265VAC

Understøtter Modbus RTU protokol

RS422/RS485 kommunikation

DKK 7.405,00 ekskl. moms


  • 16 Universal Analogue Inputs
  • Each Input Individually Selected & Scaled
  • 16 Bit Resolution
  • Differential Input for T/C, mV, V & mA
    • T/C: B, E, K, J, N, R, S, T, with CJC
    • RTD: 0~225°C to -200~850°C / (-320~1550°F)
    • mV: 0~25mV to ±500mV
    • V: 0~1V to ±15V
    • mA: 0~1mA to ±100mA
  • 2 Analogue Outputs
  • 4 Digital, Isolated, Optocoupler Inputs
  • 2 Digital, Isolated, Relay Outputs
  • RS422/RS485 Up to 1200m
  • Clock/Reset Drive up to 4 2100-M‘s
  • Selectable Baud Rate
  • Average comms message; RS422, RS485, Ethernet = 100msec
  • 4 messages required to read all inputs
  • Internal memory refresh rate for all channels = 4 secs
  • Digital Inputs
    • State or Count
    • Speeds to 50Hz
  • Interface for 2100-R2 (16 Relays)
    • Cascade option for a second 2100-R2 [supported on 2100-A16 (rev 1.3) only]. (Enables 32 Relays).
  • Easy Programming Via MicroScan Maps
  • Programmable Station Number
  • Programmable Relay States – NO or NC
  • Comms Failure Time-out Using Relay 2
  • Comms TXE and TX Delay Programming
  • Programming Information Retained on Power Down
  • Universal AC/DC Power Supply
  • Easy to Install
  • Compact DIN Rail Mount Enclosure


This station has all the friendly  features of a monitoring station. The 16 Universal Analogue Inputs are software programmable using the user friendly MicroScan software. Each input can be configured for any of the following inputs: Thermocouple, RTD Pt100, Pt1000, mA, mV & V. The wide choice of spans ensures high accuracy. The analogue inputs on the 2100-A16 can be expanded up to 76 using the 2100-M Input Multiplexers.

Ordering Information:

2100-A16-X Standard Unit: Analogue Inputs Pt100, 0~100C; Analogue Outputs, 4~20mA; RS485 Comms; 85~264Vac/dc Power Supply.

2100-A16 ordering table
Note 1: The 2100-A16 RS232 Comms. version is no longer available. The 2400-A16 can be used with RS232 on Comms port 2.
Note 2: The 2100-A16 is factory set to RS422/485. The 2100-A16-X is field selectable for RS422 or RS485, and H or M power supply.
Note 3: The MicroScan, PLC Message and Modbus RTU Comms Protocols come standard on all units.
Note 4: Power supply ‘H’ is field selectable for ‘M’; and ‘M’ for ‘H’.

Terminals and Layout:

2100-A16 terminals and layout