Instrument strømforsyning justerbar 5-30VDC 200mA (Intech PSW-2)

Vare nr.: INPSW-2-24

100-264VAC forsyning

5-30VDC 200mA stabiliseret udgang (standard 24VDC)

LED Power OK signal

DIN skinne montering

Høj præcision 0,1%

Tilgængelighed

Ikke på lager Flere kan bestilles på restordre

DKK 745,00 ekskl. moms

Flere kan bestilles på restordre

Beskrivelse

The PSW-2 is an isolated switch mode power supply that can supply a wide range of DC output voltages, from 5V to 30V, up to 200mA continuously, and operates over a wide range of input voltages. Due to recent advancements in Switch Mode Power Supply technology, special techniques have been developed that make the PSW-2 both very low noise (typically less than 1mV) and high precision.

Both line and load regulation is better than 0.1% over all conditions (within specified ranges). These attributes make the PSW-2 better than most comparable linear power supplies, while adding features such as DC input and voltage step-up capability. Eg 12Vdc input can be stepped up to 24Vdc output (PSW-2-L version).

Features:

  • Better than most comparable linear supplies
  • Output adjustable from 5V to 30V
  • Output current of 200mA
  • Low noise
  • Precision regulation
  • Isolated output floats close to earth potential
  • Short circuit tolerant
  • High accuracy 0.1%
  • Universal AC/DC power supply
  • Compact DIN rail mount enclosure
  • Available standard or special calibration
  • Low cost

Ordering Information:

PSW-2-X Standard Unit: High Voltage Power Supply: 100~264Vac. Output Voltage: 24Vdc.

PSW-2 ordering table

Note 1. The PSW-2-X is field selectable for ‘H’ or ‘M’ Power supply.
Note 2. Power supply ‘H’ is field selectable for ‘M’, and ‘M’ for ‘H’. Power supply ‘L’ must be ordered separately.